0
get a flat screwdriver and wedge it in as far as possible with your hand then take a metal hammer and hit it as hard as you can, if the screwdriver wont work then just hit around the case with a hammer/ sledge hammer
I don't know who wrote this, but never hammer a screwdriver into your case!
get a plastic hammer, and a heatgun (electric) heat up the case around the outgoing crankshaft and other shafts, then gently tap the shafts, it should split quite easily if you are patient
What else can I help you with?
Will a rear shock from a 1989 kx80 fit a 1985 kx80?
no
Will 1987 kx80 clutch cover fit 1992 kx80?
yes
Where is the crankcase sensor located on a 2003 pt cruiser turbo?
It does not have a crank case sensor.It does not have a crank case sensor.
What cylinders will fit a 1989 kx80?
1986 t01990 kawasaki kx80 cylinders
Why does your Yamaha Blaster loose transmission fluid?
Ive ran into this problem. It could be one of two problems, but what i have that it could be a bad crank seal or there is a crack in the case. First check the crank seal if it is good then you need to split the case and find the crack. JB Weld will fix it right up.
What is the spark plug gap for a kawasaki Kx80 bike?
.024-.028 is for the kx80 thru 1991.
Can 1993 kx80 fenders and side covers fix a 1987 kx80?
no diffent styel bike
Where is my crank case ventilator hose?
on top of the crank case towards the outside , it vents into the carb by vacume.
How do you change the crank case ventilation valve on a BMW 740il?
replaced crank case valve location at valve cover
How fast is a kx80?
75-80
What is the seat height for a 1996 Kawasaki KX80?
cannot find 96 specs but a 98 kx80 has 33.1 inch seat height
How do you change crank case oil in a 1997 440 ski-doo bombardier?
There is no oil in the crank case,,you use mixed gas and oil that's what lubes the crank bearings and piston rings.
