To start a 2002 Honda Rancher four-wheeler, ensure the vehicle is in neutral and the kill switch is in the "run" position. Turn the ignition key to the "on" position, then press the start button while squeezing the front brake lever. If the engine doesn't start, check the fuel level and battery condition. Once started, allow the engine to warm up before riding.
head torque specs for 2002 honda rancher
not 100% shure but since 2007 is a 420 and 2002 is 350 and the 350 has a carb and 420 fuel injected but if so i might do it to my 06 rancher
The oil capacity on a "2002 Honda Foreman" is, 3 quarts.
how do i check the timing on my 02 honda 350 atv
in front of the cooling fan
This is the whole repair manual that includes the wiring diagram, trouble shooting, and more. It is for a 2000- 2003. I have a 2002 Honda rancher 350 also. See link below:
The tire size for a 2002 Honda Rancher 350 4x4 is typically 24x8-12 for the front tires and 24x10-11 for the rear tires. It's always a good idea to check the owner's manual or the tire sidewall for specific recommendations and to ensure compatibility.
I have a 2002 Honda Rancher 350 and the front skid plate attaches to the brush guard near the bottom. A new one is about $34 for a new one at Motosport.com with about $8 shipping. Hope this helps.
To adjust the carburetor on your 2002 Honda Rancher 350 ES, first ensure the engine is off and cool. Remove the air filter cover and filter to access the carburetor. Locate the idle adjustment screw, typically found on the side of the carburetor; turn it clockwise to increase the idle speed or counterclockwise to decrease it. After making adjustments, start the engine and fine-tune as necessary for smooth operation.
Is there gas?
2002
Your 2002 Honda Rancher ES may not be charging due to several potential issues. Common causes include a faulty battery, a malfunctioning voltage regulator, or a damaged stator. Additionally, check the wiring and connections for corrosion or damage, as these can interrupt the charging system. Testing the components with a multimeter can help identify the specific problem.