To test the coil on a 1990 Yamaha FZR 600, first, ensure the motorcycle is off and disconnect the coil's electrical connectors. Use a multimeter to check the primary resistance by measuring across the terminals; it should typically read between 2 to 3 ohms. Next, check the secondary resistance by measuring between the high-tension output and the ground; this should usually range from 7,000 to 15,000 ohms. If the readings are outside these ranges, the coil may need to be replaced.
10.8 oz. per leg
The drain plug is on the frame, just behind the front wheel.
Check the kill switch. and the ignition switch. If no power check all fuses.
the difference is the Yamaha is better
What are the valve clearances on a 2001 Yamaha grizzly 600?
a diagram
about 60
32HP
one
Use any name brand 100% synthetic oil SAE 20w40.
BS30
50