Subjects>Auto>Motorcycles & Offroad Vehicles

How do you tighten the chain on a 1987 Honda trx 250x quad?

Anonymous

∙ 16y ago

Updated: 10/20/2022

on the rear axle housing, sprocket side, there should be a large spanner nut. Loosen the two bolts that tighten the rear axle in the housing and turn that spanner nut. Not sure which direction, you should be able to figure that out.

Wiki User

∙ 16y ago

What else can I help you with?

Does the 1987 Honda 250x have reverse?

Yes it does.

What is the Top speed 1987 Honda 250x?

I clocked my 1987 250x at 62mph using a friend's car following.

How do you tighten the chain on a Honda 250x ATV?

stick a screw driver in sprocket hole into the slits cut for tightening loosen the two bolts and jerk ATV forward

How do you loosen chain on 1987 250x?

When its lose enough. Take a link out.

How do you tighten my chain on a 87 250x ATV?

you can tighten the actual chain but that may be hard to do. my advice is that there shoulbe be some bolts in the swingarms that holg the axle in one place loosen them and move the axle back until the chain is where you want it

Do you have to mix the gas in a 1987 250x Honda?

no you dont have to its a 4-stroke it runs on unleaded fuel no mix

What spark plug for a 1987 Honda 250X 4-wheeler?

NGK Makes Really Good Spart Plugs.

1987 Honda TRX 250X Spark Plug Gap?

It is a 18 mm socket that works to get the spark plug out, it took me a while to figure it out.

How fast does a 1991 Honda 250X go?

not fast enough

What is the top speed of a 2012 Honda trx 250x?

What oil for trx 1987 250x?

10w-30

What type of oil to use in 1992 Honda 250x?

10 w 40 is what honda recomends