Loosen the four Allen bolts @ the very back of the swingarm. Do it little @ a time each bolt to keep from cracking the housing. Then rotate the assembly forward & re-tighten.
1 & 1/4 slack is recommended.
definitly
The 400ex its got a bigger motor... :P
take the timing chain cover off and with a wire hanger pull it from the bottom to the top sprocket so it doesn't fall.
The 250R is going to win
1.9 us quarts
no they dont have reverse unlil 2005
The gap for this car is 0.024" to 0.028."
No it does not, you can have it installed or specially ordered like that.
There are four 6mm Allen (hex) cap screws on the back of the swing are that clamp the axle. Loosen (do not remove) all four. On the left side of the swing arm by there is a large disc, rotate the disc clockwise to tighten or counterclockwise to loosen the chain. Tighten the four screws and you are done.
No the 250,300,and 400 ex all have differwent air filters
how to time a 2002 400ex
It has a timing chain