0
What else can I help you with?
Torque specs for head on 1980 Yamaha YZ490?
there is no such bike yz490 didn't start till 1982 and went on to 1990 before this it was a 465 ....
Will the exhaust from a 1985 yz 490 fit on a 1984 yz 490?
Yes it will. The 1984 yz490 and the 1985 yz490 are identical bikes other than the front disc brakes.
What year is a Yamaha yz490 with the vin 5x6-004432?
1982
What year is a Yamaha YZ490 with the serial number 2wh-006177?
1988
What year is a Yamaha yz490 with the vin 5x6-001320?
1982 yz490j cheers rusty
What year is your Yamaha Yz490 Vin jya2hj00xha000645?
This is a 1987 Model. The original color was white.
Why does your yz490 spit oil from exhaust?
That is the burnt two stroke oil. it is pretty normal
What is good dirt bike for 13 year old 5'6?
Kawasaki Kx500, any year will do, but the best bike for a beginner is a Yamaha yz490
What is correct spark plug gap for Yamaha yz 490 motorcycle?
1982-87 yz 490 - ngk br8es - 0.024 " , 1988-90 yz490 - 0.032 "
You just replaced the clutch in your yz490 and you cant get it to disengage is it because the adjustment screw is not right?
On mine I h.ad the same prob. Got hot enough to weld the clutch rod to the bearings
What is the Torque Specs For a 1985 Yz490?
For a 1985 Yamaha YZ490, the torque specifications vary by component. Generally, the cylinder head bolts should be torqued to around 25 ft-lbs, while the base gasket bolts are typically around 18 ft-lbs. It's essential to refer to a service manual for detailed specifications and the correct sequence for tightening bolts to ensure proper assembly. Always double-check with the latest resources or manuals for any updates or specific details.
What is the fuel oil mixture for a 1987 Yz490?
This is a trick question in that the correct fuel to oil mixture is not dependant upon the type of motorcycle. It IS dependant on the type of oil itself ... which is to say it's lubricating capability and other properties. To achieve the proper ratio, one should always follow the recommendations and specifications put out by the oil manufac turer. For most of the new highly-concentrated synthetic pre-mix oils, that ratio is typically around 40:1. But, can go as high as 50:1 for some brands. If your style of riding, track and weather conditions, etc., lead to abnormally high engine teperatures or, if you particular motor tends to run unusually warm, it's best to err on the conservative side and mix at a slightly lower ratio than the manufacturer recommends. Never mix at a ratio that is higher than recommended. MrGlock2 group founder/moderator Yahoo.com YZ490 http://groups.yahoo.com/group/YZ490
