answersLogoWhite

0

What else can I help you with?

Related Questions

What year is a Yamaha yz490 with the vin 5x6-004432?

1982


Torque specs for head on 1980 Yamaha YZ490?

there is no such bike yz490 didn't start till 1982 and went on to 1990 before this it was a 465 ....


What year is a Yamaha yz490 with the vin 5x6-001320?

1982 yz490j cheers rusty


What year is your Yamaha Yz490 Vin jya2hj00xha000645?

This is a 1987 Model. The original color was white.


What is good dirt bike for 13 year old 5'6?

Kawasaki Kx500, any year will do, but the best bike for a beginner is a Yamaha yz490


What is correct spark plug gap for Yamaha yz 490 motorcycle?

1982-87 yz 490 - ngk br8es - 0.024 " , 1988-90 yz490 - 0.032 "


Will the exhaust from a 1985 yz 490 fit on a 1984 yz 490?

Yes it will. The 1984 yz490 and the 1985 yz490 are identical bikes other than the front disc brakes.


How fast is a yz490?

usually about 90 or 95 with stock gearing


What is the Torque Specs For a 1985 Yz490?

For a 1985 Yamaha YZ490, the torque specifications vary by component. Generally, the cylinder head bolts should be torqued to around 25 ft-lbs, while the base gasket bolts are typically around 18 ft-lbs. It's essential to refer to a service manual for detailed specifications and the correct sequence for tightening bolts to ensure proper assembly. Always double-check with the latest resources or manuals for any updates or specific details.


Why does your yz490 spit oil from exhaust?

That is the burnt two stroke oil. it is pretty normal


What type of oil do you use in a 1982 Yamaha YZ490?

It's a Yamaha so it'll call for yamalube but I have one just like it and I use Honda tranny oil and I have no problems with it and its about $3 cheaper but it root depends on how aggressive u r on it me I drive mine like its a 4 stroke and have had the same plug for 13 years but if u want it to stay all factory I recommend using yamalube Yamaha designs the bike so they no exactly what is the best for it so it'll b dependable at last


You just replaced the clutch in your yz490 and you cant get it to disengage is it because the adjustment screw is not right?

On mine I h.ad the same prob. Got hot enough to weld the clutch rod to the bearings