The valve clearance for a 1987 Honda TRX 250X is typically set at 0.05 mm (0.002 inches) for the intake valves and 0.08 mm (0.003 inches) for the exhaust valves. It's important to check and adjust the valve clearance regularly to ensure optimal engine performance. Make sure the engine is cold before making adjustments, and refer to the service manual for specific procedures and specifications.
.13mm or .005inch
.095 is the Honda spec i have the service manual
.003 on intake and exhaust
what is the valve clearance 2004/05 -450trx
The Valve clearance for a 1993 TRX Honda Fourtrax is 0.03 on a feeler gauge. 0.03 -intake 0.03-exhaust
Intake and exhaust valves have the same clearance: 0.10 mm (0.0004 in).
my clymer states 0.08mm (0.003in) intake and exhaust
From what I can find the recon was not made in a 250 in 2000. There was a TRX 250 & TRX 250ES made that year?
ES stands for Electric Shifts, the other has standard shifts.
A carburetor for the 1987 Honda TRX250 Fourtrax isÊsized to be directly plugged into the motorcycle. Replacements are made for restoration toÊfactory specifications.Ê
no
To adjust the valves on a 2006 Honda TRX 450R, first ensure the engine is cold. Remove the seat and fuel tank for access, then take off the valve cover. Use a feeler gauge to check the clearance between the rocker arm and the valve stem; the intake should be set to 0.10-0.15 mm and the exhaust to 0.20-0.25 mm. Adjust the clearance by loosening the lock nut on the adjuster, turning the adjuster to achieve the proper clearance, and then re-tightening the lock nut.