answersLogoWhite

0

The cubic inch displacement of a 52 horsepower engine in a Kawasaki jet ski typically varies depending on the specific model and engine design. For Kawasaki jet skis, a common engine configuration around that horsepower rating is often in the range of 650 to 800 cc, which translates to approximately 39 to 49 cubic inches. However, to get the exact displacement, it's best to refer to the specifications for the particular model in question.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

What ways can a small engine be classified?

In cubic inch displacement or cubic centimeter displacement or HP (horse power).


What was the largest engine size in a Cadillac?

502 CID (cubic inch displacement) They also built a V16 in the 1930's but it was smaller displacement. There was also the V16 prototype they did not put into production of roughly 10 liters displacement and 1000 horse power Take your pick


How many cubic inches is 88 Horse Power?

Horsepower (HP) and cubic inches (ci) measure different concepts and are not directly convertible. Horsepower is a unit of power, while cubic inches refer to engine displacement or volume. However, in automotive contexts, an approximate rule of thumb is that a typical naturally aspirated gasoline engine produces about 1 HP per 15-20 cubic inches. Therefore, 88 HP could correspond to an engine displacement of roughly 1,320 to 1,760 cubic inches, depending on engine efficiency and design.


What is the horsepower on the 31am2n1b795 MTD PRO snowthrower?

While engine displacement and Horse power are related, you can't mathematically convert either cc's or cubic inch into horsepower. Many small displacement engines produce very high Horse power and vice-versa! Dyno-testing supplies Horse power values and displacement is measured statically through volume measurements.


What is 1.08 cc versus hp?

cc (cubic centimeters) is a measurement of a cylinder or cylinders displacement of a piston driven engine.hp (horse power) is the power produced by any engine or motor.


How many horse power in 110 cubic inches?

To convert cubic inches to horsepower, you typically need to know the engine's efficiency and design, as horsepower is not solely determined by displacement. However, a rough estimate is that 1 cubic inch can produce about 0.5 to 0.6 horsepower in a typical gasoline engine. Therefore, 110 cubic inches might yield approximately 55 to 66 horsepower, depending on the engine's specific design and tuning.


Oil capacity 27 horse kawasaki water cooled lawnmower engine?

2.1 quarts


What is the horse power for 277cc?

There is no standard relation between horsepower and engine displacement.


What is mean by cc in cars and whether there is difference in cc and hp?

CC (cubic centimeter) is a measurement of displacement used to identify the size of the combustion chambers in an engine. HP (horse power) is a measurement of power the engine can produce. CC and HP are not the same.


How much is 150cc converted to horse power?

There is no direct conversion from engine displacement to horsepower.


Do you name car engine by horse power?

More commonly by the size (displacement) or model number.


How much horse power is 420 cc?

There is no fixed relation between engine displacement and horsepower.