150psi , per. cyl. J.H
Use Honda 10w40 and you will not go wrong.
9.8 ounces
1 down, and 4 up
More info. At what speed and what's the rev's?
dot 3 or 4
Front tire: 110/90-19Rear tire: 130/90-17
The headlight bulb in a 1983 Honda Goldwing Aspencade is typically an H4 type bulb. This bulb provides both high and low beam functionality. It's important to check the owner's manual or consult a parts dealer for specific details, as there may be variations based on modifications or regional specifications.
look for about £1800 - £2000 for one in tip top condition
12,5 kg/cm2 or 175 psi
Have to remove the engine for this job. Takes anywhere fron 10 to 15 hours for the job. The part cost is from $ 150.00 to $ 250.00.
remove battery cable remove gear change lever remove two bolts thru starter then work it out .' that's it
The torque specifications for the cylinder head on a 1983 Honda GL1100 GoldWing are typically 29 lb-ft (39 Nm) for the initial torque, followed by a final torque of 43 lb-ft (58 Nm). It's important to follow the specified torque sequence to ensure even pressure across the head. Always refer to the service manual for specific procedures and additional details.