You should lube your chain a couple times a month to keep it from getting rusty and warn out.
Some and /or most chains have sealed bearings, therefore, powerwash them and then spray on a good chain lube, lift the rear axel off the ground and spin the rear tires while you spray the chain with lube,don't be stingy with the lube. Or put the chain in a parts washer for a day or two and hand dry, then give it a really good coating of chain WAX, apply it the same way as above.
how do you tighten a chain on a 150 ATV
you shorten the chain links
you shorten the chain links
it is when the back of the ATV gets loose
Have to remove chain links, there is no chain adjustment
It has an automatic chain tensioner..
There are several local locations like EZ Tire and Lube that offer good deals on ATV tires. Many car parts store will also be a good source to find ATV tires.
Check and clean the pedal system and the cable that it connects to. Lube any connections necessary, and make sure that the return spring is working, if your ATV has one.
ATV gear lube its called pure polaris agl its 10$ a qt
To remove the chain link from a 400 Sportsman ATV, first, ensure the ATV is on a flat surface and secure it to prevent movement. Use a chain breaker tool to push out the pin from the chain link you want to remove, or utilize pliers to carefully separate the link if it's a master link. Once the chain is detached, check for any wear or damage before reassembling or replacing it. Be sure to reattach the chain properly to ensure safe operation.
To tighten the chain on a Honda TRX 450R ATV, first, place the ATV on a level surface and secure it. Loosen the axle nuts on both sides of the rear axle. Then, adjust the chain tension by turning the adjuster bolts located at the rear of the swingarm; turn them evenly to maintain alignment. Finally, check the chain tension and re-tighten the axle nuts to secure the adjustment.