answersLogoWhite

0

To tighten the chain on a Honda TRX 450R ATV, first, place the ATV on a level surface and secure it. Loosen the axle nuts on both sides of the rear axle. Then, adjust the chain tension by turning the adjuster bolts located at the rear of the swingarm; turn them evenly to maintain alignment. Finally, check the chain tension and re-tighten the axle nuts to secure the adjustment.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How do you tighten a chain ATV 150?

how do you tighten a chain on a 150 ATV


How do you tighten a chain on ATV?

you shorten the chain links


How do you tighten chain on ATV?

you shorten the chain links


How do you tighten the chain on a Honda 250x ATV?

stick a screw driver in sprocket hole into the slits cut for tightening loosen the two bolts and jerk ATV forward


How do you tighten a timing chain on 88 suzuki lt 300 ATV?

It has an automatic chain tensioner..


How do you tighten a chain on a 1987 Honda fourtrax?

To tighten the chain on a 1987 Honda FourTrax, first, place the ATV on a level surface and elevate the rear with a stand. Loosen the axle nut and the two lock nuts on the chain adjuster bolts. Turn the adjuster bolts evenly on both sides to achieve the desired chain tension, ensuring the chain has approximately 1 to 1.5 inches of slack. Once adjusted, re-tighten the lock nuts and axle nut securely.


How do you Tighten the chain 2007 Honda trx 450 er?

To tighten the chain on a 2007 Honda TRX 450ER, first, place the ATV on a flat surface and elevate the rear with a lift or stand. Locate the chain adjusters on the rear axle; they are typically found on both sides. Loosen the axle nut slightly, then turn the adjuster bolts evenly on both sides to achieve the desired chain tension. After adjusting, recheck the tension, ensure the axle nut is securely tightened, and check the alignment before lowering the ATV.


How do you tighten a chain on a 150cc ATV?

To tighten the chain on a 150cc ATV, first, elevate the rear of the ATV securely using a jack or stand. Locate the chain adjusters on the rear axle; these are typically found on either side of the swingarm. Loosen the axle nut slightly, then turn the adjusters evenly on both sides to achieve the desired chain tension. Once the chain is tight, ensure it has a slight amount of slack, typically around 1-2 inches, and then re-tighten the axle nut.


How do you tighten drive chain on tao tao 110cc ATV?

To tighten the drive chain on a Tao Tao 110cc ATV, first, locate the adjustment bolts on the rear axle. Loosen the axle nuts slightly, then turn the adjustment bolts evenly on both sides to increase chain tension. After achieving the desired tension, re-tighten the axle nuts securely. Finally, check the chain's slack to ensure it's within the recommended range before testing the ATV.


How do you tighten a chain on a 125cc ATV?

To tighten the chain on a 125cc ATV, first, lift the rear of the ATV and secure it on a stand. Locate the rear axle adjustment bolts on both sides of the swingarm, and loosen the axle nut slightly. Turn the adjustment bolts evenly on both sides to pull the rear axle backward, increasing the tension on the chain. Once the desired tension is achieved, re-tighten the axle nut and double-check the chain slack to ensure it is within the recommended range.


How to tighten the chain on a 1990 Honda fourtraX 200?

To tighten the chain on a 1990 Honda FourTrax 200, first, place the ATV on a flat surface and elevate the rear with a lift or stand. Locate the rear axle adjusters on both sides of the swingarm, then loosen the axle nut and adjust the tension by turning the adjuster bolts evenly on both sides to achieve the desired chain slack. Check the chain slack by pulling on it at the midpoint; it should have about 1 to 1.5 inches of play. Finally, re-tighten the axle nut and double-check the chain tension before riding.


How do you tighten my chain on a 87 250x ATV?

you can tighten the actual chain but that may be hard to do. my advice is that there shoulbe be some bolts in the swingarms that holg the axle in one place loosen them and move the axle back until the chain is where you want it