It should be a 200cc Blaster and that would be a 2 stroke. Here is a easy way to tell if a ATV or dirt bike is a 2 or 4 stroke motor........ Look at the exhaust pipe where is comes out of head. If it goes it a really fat pipe it is a 2 stroke like a big bubble. If the pipe stays a small dia. to muffler its a 4 stroke hope this helps.
Sorry I see its a Honda a 250R its still a 2 stroke
You have a 2009 Honda TRX 250.
yes a cr250 is 2 stroke
12 Volts.
crm 250 would leave the XL 200 stood for dead
250x is a 4 stroke. The only 2 strokes Honda ever made were the 250R ATC and ATV.
A CR 250 is a Honda 2 stroke motocross bike.Ooops, forgot that Husqvarna also has a CR 250, also a 2 stroke motocross bike.
Yes, it is. It has a 248 cc two-stroke engine.
Size, model, and condition make a difference in value but a 1986 Honda 250 utility four wheeler is worth between $550 and $750. (NADAguides.com under antique motorcycles.)
Yes, it will fit and do fine! 1986 - 1991 are the same cranks.
Honda recommends SAE 10W40 in a GN4 or HP4 classification for 4 stroke applications.
For a 1985 Honda TRX 250 four-wheeler, the timing marks are typically located on the flywheel and the engine case. To properly set the timing, align the timing mark on the flywheel with the mark on the engine case when the piston is at top dead center (TDC) of the compression stroke. It's crucial to ensure that the timing chain or belt is correctly positioned to maintain proper engine performance. Always refer to the service manual for specific details and procedures.
it really depends on what 250 three wheeler you are talking about Honda makes the big red 250 the 250 x 250 sx and the 250r the the big red goes about 40-45 the 250x and sx go about 50-55 and depending on what kind of modifications are done to the 250R it could go close to 85 mph