Yes it is.
To replace the line on an Echo GT-200R weed eater, first, turn off the machine and ensure it is disconnected from the power source. Then, remove the spool from the trimmer head by pressing the tabs or unscrewing it, depending on the model. Next, take a new length of trimmer line (typically 0.095 inches in diameter), cut it to the desired length, and insert it into the spool according to the direction indicated on the spool. Finally, rewind the line, reattach the spool to the trimmer head, and you're ready to go.
Valvoline 2cycle oil ^^^^^^^^^^^^^^^^This does not answer the question... idiots.. smh. The answer is 50:1.
50:1
For an Echo weed eater, it's recommended to use a high-quality 2-stroke engine oil that meets the ISO-L-EGD and JASO FD standards. Echo specifically suggests using their own brand of 2-stroke oil for optimal performance. Always mix the oil with fresh gasoline in the correct ratio, typically 50:1 (2.6 ounces of oil per gallon of gasoline), unless specified otherwise in the user manual.
50:1 2.6 ounces per gallon
If this is in fact an Echo SRM 210, then a manual is linked below.
spark plug ga p for echo model gt 200 b
You have to take out the engine to get to it.
5kg
i bought a weed eater used so i dont have the manual and the last owner told me that the trimmer doesnt need the mix of gas and oil i wanna know if that is right? thank you for the help...
http://www.carspace.com/guides/Toyota-Echo-How-to-change-oil
It's on the OCCC website. You can find information on ECHO through the search engine.