0
What else can I help you with?
Where can i find a 50cc reliant robin 3 wheeler car for sale?
Reliant Robins do not have 50cc engines ! They are either 478cc or 848cc.
Does a throttle cable make a 50cc scooter faster?
unless the current cable doesn't move freely - no.
How do you adjust a drive chain on a monster joe 50cc ATV?
Have to remove chain links, there is no chain adjustment
How do you restrict a 50cc bike?
I think your asking how to restrict the speed of a 50cc. mini bike, you can do this with the throttle cable, adjust the cable to only open the carburetor 1/2 (half) way. If you mean how to UN-restrict the bike, the usual way is with a throttle stop, simply loosen the cinch nut and back off the stop until you achieve full throttle, and retighten the cinch nut.
How do you un-restrict a 50cc pit bike?
I think your asking how to restrict the speed of a 50cc. mini bike, you can do this with the throttle cable, adjust the cable to only open the carburetor 1/2 (half) way. If you mean how to UN-restrict the bike, the usual way is with a throttle stop, simply loosen the cinch nut and back off the stop until you achieve full throttle, and retighten the cinch nut.
Do you need a motorcycle license to drive a 110 cc bike?
indeed you do ... u need a licence for anything that has more then 50cc most of the 50cc engines are actually 49.9cc because as long as it is under 50 cc u do not need a licence... that also applies for boats indeed you do ... u need a licence for anything that has more then 50cc most of the 50cc engines are actually 49.9cc because as long as it is under 50 cc u do not need a licence... that also applies for boats
Can you put any carb on a 50cc mini bike?
no, it has to have the right diameters for the intake and air filer, also has to have the correct jet and throttle linkage
Does a Honda 50cc take mixed gas?
No, it is a four stroke so it needs normal gasoline
Where is the rev limiter located on a 50cc scooter?
on 5occ - 150cc gy6 qmb or qmj engines the rev limiter is part of the cdi programming.
Where is the governor on a 50cc honda elite?
On a 50cc Honda Elite, the governor is typically located within the variator assembly or the throttle mechanism. It regulates the maximum engine speed by limiting the throttle opening to prevent the scooter from exceeding a certain speed. If you're looking to adjust or remove the governor for increased speed, it's important to be aware of local laws and safety implications. Always ensure any modifications comply with regulations and do not compromise safety.
How do you start a 50cc with no pull start?
attach a 10mm socket to an electric drill and place it onto the flywheel nut. start drill while giving it a bit of throttle and it should start up.
How do you take the govenor off a 50cc Chinese moped 50cc NST or Maui Dreamer?
de restrictor for a hustian 50cc de restrictor for a hustian 50cc
