When a lawn mower will not start by pulling the cord, it probably needs maintenance. Changing the spark plug often will fix the issue.
Try pulling out the spark plug and clearing the cylinder
There is a small cord on the mower. DO not put your stylus directly on the loop at the top of the cord. Put your stylus at the tip of the arrow pointing to the cord. You may have to pull several times before getting the lawn mower to start. Hope this helps you.
The cord on your Honda lawn mower may not pull if it is tangled, the engine is seized, or the recoil starter is broken.
When you are moving your lawn with an electrical mower with a cord then you should travel horizontally from each end of your lawn. You should make sure that you are not turning your mower towards the cord, otherwise, the card will tangle.
sheared flywheel key. youtube has vids... type in mower cord backfires & you'll see instructions on how to fix it.
You can start it by using the pull cord, just be sure the key is in the ON position.
To turn on a lawn mower, you typically need to locate the ignition switch or pull the starter cord, then push the primer bulb a few times if it has one. Finally, pull the starter cord or turn the ignition switch to start the engine.
No the pull chord will not cause the pull cord to be tight. The coil on the lawn mower will cause the compression to be tight.
The pull cord of a lawn mower is used to manually crank the engine to get it started. As the engine is quickly turned, a spark is created which begins combustion.
For efficient and safe use with a standard electric lawn mower, it is recommended to use a 12-gauge extension cord that is at least 100 feet long.
Check the underneath of lawn mower for grass built up.
get a new one