40:1 is the fuel mixture per the manual
The fuel mixture for a 2.0 McCulloch chain saw is 32 to 1. This means that there is 1 part of 2 cycle oil mixed per 32 parts of fuel.
16:1
The fuel mix for the mculloch 60012312 is 40:1.
need a diagram for mcculloch eager beaver chain saw
The proper mixture is 40:1 or 3.2 oz oil to 1 US Gallon of gas.
The fuel mixture for a Stihl chain saw is gas and oil.
I checked a number of different sites and most recommend 40:1. One user recommended 50:1 and the Mac I had a few years ago, as I recall, recommended that mix. The slightly richer mixture of 40:1 is always safe but it will smoke a little more.
If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.
I checked a number of different sites and most recommend 40:1. One user recommended 50:1 and the Mac I had a few years ago, as I recall, recommended that mix. The slightly richer mixture of 40:1 is always safe but it will smoke a little more.
The PowerMac 145 uses a fuel mixture of 50:1, which means 50 parts gasoline to 1 part two-stroke oil. It's essential to use high-quality two-stroke oil specifically designed for air-cooled engines to ensure optimal performance and engine longevity. Always refer to the manufacturer's guidelines for the most accurate information.
use newer synthetic oil. it covers a broad range of fuel/oil ratios with one mix. it will allow you to use one fuel mix for all your 2cycle equipment. not marine though.
If using an oil other than McCulloch, the ratio is 40:1. Brand Specific McCulloch two cycle oil is 20:1.