0
Remove spark plug wire boot from spark plug.
Loosen spark plug using proper size deep well socket.
Once loose, continue removal, by hand if desired.
Gap new spark plug to 0.038" to 0.042:
Install and torque to snug tight, then turn additional 1/4 turn.
Install spark plug wire boot.
See following links for more detailed information
What else can I help you with?
What is the gap setting for a 2002 Buell Blast spark plug?
Prescribed Spark Plug Gap for Buell Blast models is from 0.038" to 0.043".
Buel blast spark plug gap?
the gap for a buell blast 500 is .040..
Where is the spark plug located on a 2002 Buell Blast?
Greetings, The spark Plug is located on the left side of the bike (if you are sitting on the bike). It is under the gas tank. Let me know if you figure out a wat to replace it. I am still working on that one. To clarify the above: The spark plug is accessed from the left side of the engine, atop the cylinder head. There is one spark plug. Access for replacement is very easy. Put a wrench on it and turn it counterclockwise to remove the old spark plug, then apply a slight film of anti-seize compound the the new spark plug's threads, carefully hand thread the properly gapped new plug into the hole, then tighten it to the specified torque using your wrench. For all the Buell Blast and other Buell Motorcycle related information you can stand, check out the Buell Forums on BadWeatherBikers.com and especially the excellent Thumper Forum; see following links. :)
Spark plug buell lightning?
The standard plugs for the Buell XB's are Harley 10R12A. The NGK iridium cross reference plug is DCPR8EIX 12mm thread and 3/4" length.
Spark plug wire replacement on a 99 sonoma?
replace spark plug wires on a 99 sonoma
What is the spark plug replacement for kawasaki mule 610?
NGK spark plug part number BPR5ES
How you ask cambio de bujias in English?
In English, "cambio de bujías" translates to "spark plug replacement." You can ask for it by saying, "Can I get a spark plug replacement?" or "I need to have my spark plugs replaced."
How do I perform a weed eater spark plug replacement?
To perform a weed eater spark plug replacement, first ensure the engine is cool. Locate the spark plug on the engine and use a spark plug wrench to remove it. Check the gap on the new spark plug and adjust if necessary. Install the new spark plug by hand, then tighten it with the wrench. Finally, reconnect the spark plug wire and test the weed eater to ensure it is running smoothly.
If you have no spark on a 1991 subaru legacy what do you check for replacement?
If you have no spark on the 1991 Subaru Legacy, you should check the spark plugs and spark plug wires for replacement. You should also check the battery and ignition for replacement.
What is the replacement spark plug for a Torch A7RC?
NGK cross reference for this plug is CR8HSA
What side of the exhaust is the oil drain plug on a buell blast?
There are 2 plugs, one for engine oil, the other for transmission/primary drive oil. Both are underneath the engine/transmission case near the kick-stand support on the left hand side. For more detailed information please see the Buell Forum, specifically the Thumper Forum for Buell Blast owners at www.BadWeatherBikers.com.
What size socket do i need for 2005 Chrysler PT Cruiser spark plug replacement?
the spark plugs require a 5/8 inch spark plug socket.
