0
What else can I help you with?
What does it mean if your car jumps after getting a tuneup?
Spark plug wire not connected to spark plug? Spark plug wire connected to Wrong spark plug? Vacuum line disconnected? Bad spark plug or wire?
How do I perform a weed eater spark plug replacement?
To perform a weed eater spark plug replacement, first ensure the engine is cool. Locate the spark plug on the engine and use a spark plug wrench to remove it. Check the gap on the new spark plug and adjust if necessary. Install the new spark plug by hand, then tighten it with the wrench. Finally, reconnect the spark plug wire and test the weed eater to ensure it is running smoothly.
How do I change the spark plug in my Honda 400 XR?
To change the spark plug in your Honda 400 XR, first ensure the engine is cool and disconnect the spark plug wire. Use a socket wrench to remove the old spark plug by turning it counterclockwise. Inspect the new spark plug and gap it to the manufacturer's specifications if necessary, then install it by threading it in clockwise and tightening it securely. Finally, reconnect the spark plug wire, and your spark plug replacement is complete.
How do you remove a spark plug when the wire came out the spark plug?
If you mean that the wire came out of the boot, then pull the boot off of the spark plug and use a spark plug socket to remove the spark plug.
What would cause one spark plug wire to arc to the engine at the spark plug boot?
bad spark plug wire.
I need a diagrarm of the spark plug wire placement on distributor cap of 1993 GMC Jimmy?
A spark plug wire replacement diagram can be found on GMC forums. It can also be found in the engine manual available at many auto store.
What is a spark plug boot?
The rubber end on the spark plug wire.
Spark plug replacement on a 02 buell blast?
Remove spark plug wire boot from spark plug. Loosen spark plug using proper size deep well socket. Once loose, continue removal, by hand if desired. Gap new spark plug to 0.038" to 0.042: Install and torque to snug tight, then turn additional 1/4 turn. Install spark plug wire boot. See following links for more detailed information
Can a vehicle start with a broken spark plug wire?
no it can not start with a broken spark plug wire unless you fix it
How do you change wire?
Spark Plug Wires? Remove them 1 at a time from the spark plug to the distributor or the ION pack, remove and replace the spark plug, add the new spark plug wire from the newly added spark plug to the distributor or ION pack.
How do you check an engine for spark?
Remove the spark plug wire from the spark plug. Use some heavy gloves or a set of insulated pliers to hold the spark plug wire about 1/4-inch from the engine block (ground) and crank the engine - you should see a spark jump from the wire to the engine ground. For a better check, use another spark plug and put it on the spark plug wire and use it as a "jumper" from the wire to the engine ground.
Where can i find wiring diagram for 92 Honda accord?
spark plug wire setup spark plug wire setup
