14:34, size 14 in engine sprocket... and size 34 on the back... mas maganda ang takbo at mas mabilis.. ok lang naman sa akyatan..siguro wag lang mas liliit pa 34..
honda wave and honda xrm is same engine,.. it depends on the driver but xrm and wave is beaten by my kawasaki aura,..
The best sprocket combination for the Honda XRM 125 typically involves a 14-tooth front sprocket paired with a 38-tooth rear sprocket. This setup balances acceleration and top speed, making it suitable for both city commuting and light off-road use. However, individual preferences and riding conditions may lead some riders to experiment with different sizes for optimal performance. Always consider your riding style and local terrain when choosing sprocket sizes.
Battery
shell ax7...
115 to 120kph
Well, honey, the best sprocket combination for an XRM 125 really depends on what you're looking to achieve. If you want more speed, go for a smaller front sprocket and a larger rear sprocket. If you want better acceleration and torque, do the opposite. Just make sure to keep it within the recommended range to avoid damaging your bike.
obviously the honda XRM 110 cause it has a small engine than raider 125... more speed means more gasoline consumption...
The compression ratio for this bike is 9.3:1.
5o ml each leg fork.
The best sprocket combination for the XRM 125 Motard typically involves a 14-tooth front sprocket and a 42-tooth rear sprocket, which offers a good balance of acceleration and top speed. This setup enhances performance for city riding and light off-road use. However, individual preferences and riding conditions may lead some riders to adjust these numbers slightly for optimal performance. Always consider your specific riding style and terrain when choosing sprocket sizes.
In order to change the motor oil on a Honda XRM 125 you need to lift the bike on a motorcycle rack. You then need to unscrew the drain plug, let the oil drain out, put the drain plug back in, change the oil and put new oil in.
shell ax7...