For the Suzuki Bandit 600, the recommended torque setting for the rear sprocket nuts is typically around 40-50 Nm (29-37 lb-ft). It's important to consult the specific service manual for your model year to confirm the exact specifications, as they can vary. Always ensure that the sprocket is properly aligned and that the nuts are tightened in a crisscross pattern for even distribution of pressure. Regularly check these settings during maintenance to ensure safety and performance.
The chain is size 530, and the stock gearing is 15/45, meaning that the front sprocket has 15 teeth and the rear sprocket has 45 teeth.
A bigger front sprocket gives a higher top speed. A bigger rear sprocket gives a lower top speed. A bigger front sprocket is less torque more top speed, and a bigger rear sprocket is more torque less top speed.
39hp and 36ftlbs of torque.
The rear hub nut torque settings on a Renault Clio should be set at 175Nm this is what holds the disc in place.
235 NM
200Nm
Rear: 60Nm Front: 145Nm Please see the related link below for more information.
90 lbs
210 nm
It depends on whether you are talking about the front sprocket (the one at the pedals, called a chainring) or the sprocket at the rear derailleur. The lowest gear at the front is the smallest sprocket/chainring. The lowest gear at the rear is the largest sprocket. So if you combine the smallest sprocket at the front with the largest sprocket in the rear you have the lowest gear available on your bike.
I think it's 210ft-lbs.
288lb/ft to 334lb/ft