0
What else can I help you with?
Where are the breaker points and condenser connected in an ignition system on small engines?
In a small engine ignition system, the breaker points are typically connected to the ignition coil and the condenser (or capacitor) is connected in parallel with the breaker points. When the engine is running, the breaker points open and close to control the flow of current to the ignition coil, while the condenser helps to suppress electrical arcing at the points, prolonging their lifespan and improving ignition efficiency. This configuration allows for the generation of a high-voltage spark needed for combustion in the engine's cylinders.
The function of the condenser in a breaker points ignition system is to?
The function of the condenser in a breaker points ignition system is to keep the points from sticking together. If the points stick together during ignition it could cause the points to burn up. The condenser sends a signal to the points and then takes the signal away to make the points separate.
What does a condenser do in a breaker points ignition system?
In a breaker points ignition system, a condenser, or capacitor, serves to store and release electrical energy. When the breaker points open, the condenser discharges its stored energy, which helps to create a stronger spark at the ignition coil. This results in an improved ignition of the air-fuel mixture in the engine's combustion chamber. Additionally, the condenser helps to prevent arcing across the breaker points, prolonging their life and ensuring reliable operation.
Were are the breaker points and condenser connected in an ignition system?
It depends on what motor you are talking about. If it is a newer motor it may have no points or condenser. Most points and condensers are usually located on the end of the crank shaft under the fly wheel.
The function of the condensor in a breaker points ignition system is to what?
The function of the condenser in a breaker points ignition system is to store electrical energy and release it quickly to create a high-voltage spark at the spark plug. It helps to suppress voltage spikes that can occur when the breaker points open, preventing arcing and prolonging the life of the points. Additionally, the condenser aids in ensuring a more efficient ignition timing by improving the overall performance of the ignition system.
How do the wires hook up to the coil in a 1969 Chevy Camaro with a condenser?
The negative side of the coil is connected to the breaker points and condenser. The posotive side comes from the ignition switch. And the center terminal is connected to the center terminal of the distributor cap. ID REPLACE IT WITH A HEI MUCH BETTER THEN A POINTS SYSTEM.AND IT ONLY HAS ONE POWER WIRE TO HOOK UP.
On a Chevrolet 350 does an electronic ignition have points?
No it does not have points or condenser.
Does 83 ranger have points and condenser?
Nope- electronic ignition.
Will a bad ignition condenser keep a motorcycle from firing?
Yes, a bad ignition condenser will keep a motorcycle from firing. A bad ignition condenser might also have caused the points to stick together and burn up.
Where is the ignition condenser located on a 1976 Dodge D200?
Ignition condensers went out with the ignition points in the early 1970's.
Can an electronic ignition be used in lieu of points and condenser on Briggs and straton engine?
yes
Is an ignition condenser necessary?
An ignition condenser, often used in older ignition systems, is not strictly necessary in modern electronic ignition systems, which typically do not require one. However, in traditional points-type ignition systems, the condenser plays a crucial role by preventing arcing at the points, improving performance, and extending the life of the ignition components. While it's not essential for all vehicles, it remains important for those utilizing older technology to ensure smooth engine operation and prevent damage.
