answersLogoWhite

0

On the 2008 Harley-Davidson Road Glide, the primary fluid levels to monitor include engine oil, Transmission Fluid, and primary fluid. The engine oil level should be checked using the dipstick located on the oil tank, while the transmission fluid level can be checked through the transmission's inspection cover. Additionally, ensure that the primary fluid is at the proper level as indicated by the access cover. Regular maintenance and checking of these fluid levels are essential for optimal performance and longevity of the motorcycle.

User Avatar

AnswerBot

1w ago

What else can I help you with?

Related Questions

How much does a Harley road glide weight?

A 2012 Harley Road Glide Custom weighs 817 pounds with all fluids.


What is the oil capacity of a 2008 road glide?

The oil capacity of a 2008 Harley-Davidson Road Glide is approximately 3.5 quarts (or 3.3 liters) with a filter change. If you're just changing the oil without replacing the filter, it typically holds around 3 quarts (or 2.8 liters). Always refer to the owner's manual for the most accurate specifications and recommendations.


What does FLHTC stand for?

flhtc is Harley code for electra glide classic flht is electra glide standard flhtcu is electra glide ultra classic flhr is road king flhrc is road king classic


What is the best selling touring motorcycle in America?

Harley Road Glide and Road Glide Special are best selling touring motorcycles of America.


How many cc's in a 2008 Harley Davidson road glide?

The 2008 Harley-Davidson Road Glide is equipped with a 96 cubic inch (ci) V-twin engine, which is approximately 1,584 cubic centimeters (cc). This engine offers a balance of power and comfort, making it suitable for long-distance cruising. Additionally, some models may also feature a 103 ci engine, which is about 1,688 cc.


When was the Harley Street Glide made?

The Harley Street GLide, FLHX/I was first introduced in 2006. In 2005 the Harley Road Glide Standard, FLHT/FLHTI was similar to the Street Glide.Hope this helps!Dave


How much does an average Harley Davidson Road Glide cost?

Harley Davidson Road Glides start at just under twenty thousand dollars. A custom Harley Davidson Road Glide starts at nineteen thousand seven hundred and ninety nine dollars.


Where is oil drain plug on 2001 harley Davidson road glide?

The oil drain plug on a 2001 Harley Davidson Road Glide is located on the bottom of the engine. It allows the coil to be quickly drained during maintenance.


How do you tighten the front fork on 2006 road glide?

What is the torc speck for 2001 Road King, Front axel bolts


Will the wheels off 2013 road glide fit a 1998 road glide?

The wheels from a 2013 Road Glide are not directly compatible with a 1998 Road Glide due to differences in hub design, axle size, and brake rotor configurations. While both models are part of the Harley-Davidson touring family, significant changes were made over the years. To use wheels from a 2013 model on a 1998, you would likely need custom adapters or modifications, which may not be practical. Always consult with a professional mechanic or Harley-Davidson specialist for precise compatibility details.


How much oil goes in 41mm fork tubes for 2010 road glide?

11oz


How do i replace shift shaft on Harley road glide?

To replace the shift shaft on a Harley Road Glide, first, make sure the motorcycle is securely on a stand and the battery is disconnected. Remove the primary cover, drain the primary fluid, and then take out the old shift shaft by unbolting it from the transmission. Install the new shift shaft by reversing the removal steps, ensuring that all components are properly aligned and securely fastened before reassembling the primary cover and refilling with fluid. Always consult your service manual for specific instructions and torque specifications.