The four strokes of a four-stroke engine are the intake, compression, power, and exhaust strokes. During the intake stroke, the engine draws in air and fuel. The compression stroke then compresses this mixture, followed by the power stroke, where the spark plug ignites the mixture, generating power. Finally, in the exhaust stroke, the engine expels the burnt gases from the combustion process.
A two stroke engine combines the four strokes of a typical internal combustion engine into two strokes instead of four.
Four stroke engines are quieter than two strokes, but have less power.
The four strokes are... Intake, Compression, Combustion, Exhaust.
intake-compression-combustion-exhaust
2 stroke means it takes two strokes for a power stroke and 4 sroke takes four strokes for power stroke so in otherwise 2 strokes are way faster and more torqey
In a two-stroke engine, two strokes is one cycle. In a four stroke engine, four strokes is one complete cycle. A stroke is a part of a cycle. Remember that the "up" motion and the "down" motion each count as one stroke.
4 strokes for a four stroke, intake, compression,powewr, exhaust
suction stroke and exhaust strokes are the two strokes involved in 2 stroke engine....
A four stroke engine has 4 strokes per cycle, whereas the two stroke engine has only 2 strokes per cycle. Since the 2 stroke engine has twice as many power strokes as a 4 stroke engine at a given rpm, the 2 stroke is capable of making nearly twice the power of a 4 stroke for a given displacement.
It could be anything. The difference between the two is that in a two-stroke engine the piston goes back and forth (two strokes) for every ignition event (spark plug firing for a gas engine or fuel injection for a Diesel), while it goes back and forth twice (four strokes) for a four stroke engine.
It depends on the type of engine. In a four-stroke engine, there are four strokes - intake, compression, power (combustion), and exhaust - required to complete one full rotation of the crankshaft. In a two-stroke engine, there are two strokes - compression/ignition and exhaust - needed to complete one rotation.
The strokes of a four stroke engine are intake, compression, power, and exhaust. The engine takes in the fuel, compresses it, uses it for power, and then the excess fuel comes out the exhaust.