0
the 1990 yz250 doesnot have a stator it is a single cylinder 249cc 2stk internal combustion engine. it is a water cooled motor' Obviously the guy that left an answer doesnt know anything about Motorcycles. All dirtbikes have a "stator." The stator is located fix to the case on the left side (on the yz250) and the flywheel spins over it to make electricity to power the coil. But to answer you about the Ohm resistance the best way is to just get a service manual to make sure you ohm out the correct wires in the right combo.
What else can I help you with?
Cylinder head torque specs on yz250?
torque de yz 250
What is the torque specs for 1998 Yamaha yz250 cylinder head?
20 ft lbs
Where is stator on 1990 evinrude?
The stator on an Evinrude outboard is located under the engine flywheel.
Will the front forks off a 1990 YZ250 fit on a 1998 YZ250?
I am fairly sure the fork style changed... I would not take the chance if possible
How much horsepower does a 1990 Yamaha YZ250 have?
Stock it would be in the 45-47hp range.
Where is the oil check on 1990 YZ250?
750 ML or CC's it's the same thing.
What is the oil capacity of the gear box in a 1990 YZ250?
transmission oil capacity is 0.75 liters
What Yamaha yz250 cylinders are interchangable with a 1990?
1988-1991 yz250 motors are completely interchangeable. Some parts like the cylinder head use the same casting from 1988-1996. Note: although interchangeable the cylinder ports and cylinder head combustion chamber shape differ form year to year. The optimum setup for a 1990 yz250 is a 1991 cylinder with a 1992 head.
Picture diagram of a power valve for a 1990 Yamaha yz 250?
1990 yz250 2 stroke power valve set up information, adjustment ?
How do you replace the stator on a 1990 kawasaki vulcan en 500?
To replace the stator on a 1990 Kawasaki Vulcan EN 500, begin by disconnecting the battery and removing the left side cover to access the stator. Next, detach the stator wire connectors and remove the bolts securing the stator to the engine case. Carefully pull out the old stator and install the new one, securing it with the bolts and reconnecting the wire connectors. Finally, reassemble the left side cover and reconnect the battery before testing the system.
What are the Speaker specs for a 1990 Bonneville SE?
The speakers specs in the 1990 Pontiac Bonneville se are 6"x9" in the rear and 4"x2" in the front.
What are the wheel specs for a 1990 Chevy k1500?
You can Google it specifically or call your local GM dealer for the specs.
