0
Piston 1&4 have to be at TDC, T- mark on the generator side has to match with the upper and lower block joint. Intake camshaft goes on the carburetor side and exhaust on the manifold side. Camshaft caps are named I1,I2 and E1, E2 they have an arrow which should point to the clutch side. E2and I2 goes on the clutch side and i1,E1 on the generator side. !1and e1 have a punch mark which is aligned with thepunch mark at the camshafts 90 degrees vertical from the block where they sit. Install exhaust camshaft with out any slack and the install intake cam, you might need to rotate this second shaft to get it aligned. install chain cover and torque all bolts to 7.2 ft/lbs install tensioner on the side and get a new gasket for the cover. Good luck.
What else can I help you with?
What are the values of the timing marks on a 1993 dodge daytona 2.5 liter engine?
location timing marks 1993 dodge datona
What are the timing marks for 1989 Toyota Camry?
timing marks 1993 yoyota Camry 2200
Timing marks for a 1993 Geo Metro?
The timing marks on a 1993 Geo Metro are located on the on the camshaft and crankshaft sprockets. They must be aligned together to ensure proper initial timing.
The diaghram on the timing marks for 1993 sporster 1200?
i need to know where the timing marks should be on a 93 sporster .
What are the timing marks for a 1993 3.1L 6 cylinder?
The timing marks can be found on the front main pulley and the flywheel. The timing marks indicate when a certain piston is at the top of its stroke.
What are the timing marks on a 1993 dodge shadow 2.5 liter engine and how do you set them?
timing marks dodge 2.2 engine how to set them
Timing marks or settings 18 1993 Mitsubishi eclipse?
Check
Where are the 1993 Pontiac lemans 1.6 timing marks?
why did my timing belt break on my pontiac 1.6 1993 motor also will the valves be bent because of that
Where are the timing marks on a 1993 Volvo 960?
On a 1993 Volvo 960, the timing marks can be found on the crankshaft pulley and the timing cover. The crankshaft pulley has a mark that aligns with a reference point on the timing cover, indicating the correct timing position. Additionally, there may be marks on the camshaft sprockets for aligning the camshafts during timing belt installation. Always refer to the service manual for precise details and specifications.
1993 Nissan Pick-up 2.4L timing chain alignment marks?
Diagram of ignition timimg marks
How do you check timing gmc 1993 van?
MY TIMING MARKS ARE UNDERNEATH INSTEAD OF THE USUAL TOP LOCATIONS FOR PICKUPS
What is the correct timing marks for a 1993 Plymouth sundance?
tdc 12 degrees
