answersLogoWhite

0

The value of a 2006 Honda Rancher 4x4 typically ranges from $2,500 to $4,500, depending on its condition, mileage, and any modifications or accessories. Factors such as geographical location and demand can also influence its market value. To get a more accurate estimate, checking local listings and resources like Kelley Blue Book or NADA Guides can be helpful.

User Avatar

AnswerBot

3d ago

What else can I help you with?

Related Questions

What type of transmission oil go in 2006 Honda 400 4x4 rancher at?

2004 Honda rancher tranimission oil


What is the nut size on the hub of a 4X4 2003 Honda Rancher?

My 2006 is a 30mm


Where is the transmission fluid for the Honda rancher es?

the engine oil and trans oil is all in one!


How do you replace the shift sensor on a Honda rancher?

where is the oil filter on theHonda 4x4 425 Rancher 4 Wheeler


Is a Honda rancher 350 faster than a forman?

the top speed of both is 53 but the rancher seems to get there much quicker but my forman is 4x4 and my rancher is 2wd


What is the difference between the rancher 350 EX Quad and the Honda 350 ES 4x4?

there is no such thing as a 350EX quad and the 350 rancher is a 4x4. The 300ex or 400ex quads are racing bikes....2wd


Where is the radiator on a 2002 Honda rancher 350 4x4?

in front of the cooling fan


What are valve specs on 2000 350 Honda rancher 4x4?

.15mm or .006 inches cold.


How do you remove a front axle on a Honda 420 rancher 4x4?

How do you get the axle out to change the boots on the cv joints


How do you remove front drive shaft on a Honda rancher 350 4x4?

cut it use jb weld to put back together in half


What oil filter fits a 2012 Honda rancher 420 4x4?

The oil filter that fits a 2012 Honda Rancher 420 4x4 is typically the Honda 15400-PLM-A01 or an equivalent aftermarket filter, such as the K&N KN-138 or the Fram PH6017A. It's essential to ensure compatibility by checking your vehicle's manual or consulting with an auto parts retailer. Always verify the specifications and fitment before making a purchase.


The Honda rancher ES 350 is stuck in 4x4 how do you get it out?

To disengage the 4x4 on a Honda Rancher ES 350, start by ensuring the ATV is on level ground and that the engine is running. Shift the transmission into neutral, then use the switch or lever to toggle back to 2WD. If the 4x4 system is still stuck, check for any obstructions or issues with the actuator and consult the owner’s manual for troubleshooting tips. If needed, a mechanic may need to inspect the system for more complex problems.