50/50 mix. 50% correct type antifreeze and 50% distilled water. Do not use tap water.
To change the coolant in a Honda Rancher 420 ATV, start by ensuring the engine is cool and then place a drain pan under the radiator. Remove the radiator cap and drain the old coolant by loosening the drain bolt at the bottom of the radiator. Once drained, close the drain bolt, fill the radiator with new coolant (typically a mix of antifreeze and distilled water), and replace the radiator cap. Finally, run the engine for a few minutes to circulate the new coolant, check for leaks, and top off if necessary.
Best to use the Honda coolant 50/50 mix.
None, never heard of a two stroke arctic cat ATV
I would use the Honda pre-mix.
20:1 oil mix is recommended
could anyone help me i have a 2001 Honda cr80 and could anyone tell me how much coolant do i put in the radiator and what mix ratio for the fuel also what would be the best engine oil to use cheers Chris
32 to one
32:1
Every 2 stroke Honda that I have had is 20 to 1.
It really is best to get the pre-mix from your Honda dealer. Can't go wrong with this.
I have one of these my self and the answer is quite simple. i use a 50:1 fuel-oil mix ratio Hope this helps.
mix fuel honda atc 200x 1984