No. Use Coolant from honda dealership
the 97 cbr 600 (f3 i believe) has 105www.bikez.com/motorcycles/honda_cbr_600_f_1997.phpis a good place for bike specs. but remember anyone who rides/knows bikes is going to use cc's its more universal when it comes to bikes.
That Is a lower compression, high rpm enine so you need to use premium, 90 octane minimum, preferably 91.
For the 1997 thru 2007 Honda Shadow VLX 600 use a 50-50 mixture of distilled water and ethylene glycol for maximum corrosion protection. DO NOT USE alcohol-based antifreeze or an antifreeze with self sealing propreties. Add the coolant at the reserve tank. For the 1997 thru 2007 Honda Shadow VLX 600 use a 50-50 mixture of distilled water and ethylene glycol for maximum corrosion protection. DO NOT USE alcohol-based antifreeze or an antifreeze with self sealing propreties. Add the coolant at the reserve tank.
just go get some prestone. any kind will work unless it specifically says only made for a certain car brand. I use a coolant called engine ice for my dirtbikes and i won't use any thing else now. Hope this helps.Its around $20 for a half gallon.
The 2005 Honda CBR 600 typically holds about 410 ml (13.9 oz) of fork oil per leg when serviced. However, it's essential to check the owner's manual or service manual for specific details, as the exact amount can vary based on modifications or specific model variants. Always ensure to use the recommended type and viscosity of fork oil for optimal performance.
You just compress all the images into one rar file and rename it to .cbr that simple :) You can use also GonVisor, this is a cbr reader but it also help you to create cbr´s, sorting the images as you want and adding a file info (Author, comments, date..)
For a Honda CBR 125, it usually costs from about $2500 to $3500 if you were to buy a second hand one. Honda CBR 125 is a small bike which is easier for beginners to use.
10-40w without molybdenum.
To top up the coolant in a Honda VT 600, locate the coolant reservoir, which is typically found near the radiator on the right side of the bike. Remove the cap and check the coolant level; if it's low, add a suitable motorcycle coolant until it reaches the appropriate level. Be sure to use the correct type of coolant specified in your owner's manual, and avoid opening the radiator cap when the engine is hot to prevent burns. Always check for leaks and ensure the system is sealed properly after topping up.
For the Honda CBR 400 basic oil is used for the motor. You can purchase the oil at a local auto parts store such as auto zone.
Regular Unleaded 87 octane