30 hp @5400 rpm depending on the year but its close
what is the horsepower and torque of the suzuki boulevard c90
With filter 2.1 Qts
its under the engine
71 HP
Chris 27
1.8 qt no filter-------2.1 with filter
It has 45.1 wheel horsepower. That's whats measured at the rear wheel.
79 HP @ 5400 RPM
2005 boulevard has a slide plate that cover the key slot to lock the front forks located on right side below the headlight. Hope this helps
For the Suzuki Boulevard S40, it is recommended to use 10W-40 full synthetic oil or a high-quality motorcycle oil that meets JASO MA or MA2 specifications. This ensures optimal performance and protection for the engine. Always check the owner's manual for specific recommendations and any updates regarding oil types or specifications.
The Suzuki Boulevard S40 typically uses about 3.2 quarts (approximately 3 liters) of oil when performing an oil change, including the oil filter. It's important to check the owner's manual for the specific model year for any variations in oil capacity or specifications. Always use the recommended oil type for optimal performance.
To start a 2005 Suzuki Boulevard S40, ensure the motorcycle is in neutral and the kickstand is up. Turn the ignition key to the "ON" position, then press the starter button located on the right handlebar. If the engine doesn't start immediately, you may need to give it a little throttle while pressing the starter. Once started, let it idle for a moment before riding.