answersLogoWhite

0

For the Suzuki Boulevard S40, it is recommended to use 10W-40 full synthetic oil or a high-quality motorcycle oil that meets JASO MA or MA2 specifications. This ensures optimal performance and protection for the engine. Always check the owner's manual for specific recommendations and any updates regarding oil types or specifications.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Related Questions

What is oil capacity of a 2005 suzuki boulevard s40?

With filter 2.1 Qts


Where is the oil drain plug on a 2007 Suzuki Boulevard S40?

its under the engine


What is oil capacity of a 2007 suzuki boulevard s40 motorcycle?

1.8 qt no filter-------2.1 with filter


How much oil does a Suzuki Boulevard s40 use?

The Suzuki Boulevard S40 typically uses about 3.2 quarts (approximately 3 liters) of oil when performing an oil change, including the oil filter. It's important to check the owner's manual for the specific model year for any variations in oil capacity or specifications. Always use the recommended oil type for optimal performance.


What is horsepower of Suzuki boulevard S40?

30 hp @5400 rpm depending on the year but its close


How do you lock the forks on suzuki boulevard s40?

2005 boulevard has a slide plate that cover the key slot to lock the front forks located on right side below the headlight. Hope this helps


Where is the oil filter on a suzuki boulevard s40?

The oil filter is under a metal cap held in with three hex bolts just next to the exhaust pipe on the right side of the bike. You can't miss it once it's pointed out. You have to remove the cover and then access the filter.


How much engine oil Suzuki 650 savage?

The Suzuki 650 Savage, also known as the Suzuki S40 Boulevard, typically requires about 2.5 quarts (approximately 2.4 liters) of engine oil when performing an oil change with a filter replacement. If you're just changing the oil without replacing the filter, it needs around 2.0 quarts (approximately 1.9 liters). Always consult the owner's manual for the most accurate information regarding oil capacity and specifications.


How do you start a 2005 suzuki boulevard s40?

To start a 2005 Suzuki Boulevard S40, ensure the motorcycle is in neutral and the kickstand is up. Turn the ignition key to the "ON" position, then press the starter button located on the right handlebar. If the engine doesn't start immediately, you may need to give it a little throttle while pressing the starter. Once started, let it idle for a moment before riding.


What side is the positive terminal for the 2007 boulevard s40?

In a 2007 Boulevard S40 the positive terminal of a battery is located where the red terminal is. Another characteristic that separates it from the negative side is the width of the positive terminal.


Can two people ride on a s40 Suzuki motorcycle 2006?

yes


Where is the oil drain plug on Volvo s40?

how do u perform an oil change on the 01 Volvo s40