7 to 9 ft lbs
9-10 ft-lbs
The torque specs are 108-120 in-lbs. But there is a sequence patern they must be tightened with. You need to get a manual.
What is a primary mount? You have an inner primary, outer primary, inspection cover, and derby cover.
A Harley Davidson cover, or a motorcycle cover in general, can be purchased from a motorcycle store. Covers that are made by the Harley Davidson company can be purchased or ordered from any official Harley Davidson dealership.
On the leftside inside what is known as the primary cover. Access can be gained via the Derby cover.
Harley Davidson motorcycle covers can be purchased on eBay, Amazon, Just Motorcycle Covers, and Cars Cover. Also Harley Davidson sells many covers for their motorcycles.
One can purchase a Harley Davidson hitch cover at any Harley Davidson accessories store. Or one can look on eBay or Amazon as they sell motorcycle accessories as well.
To replace the clutch on a 1997 Harley Davidson Fat Boy, first, remove the primary cover by loosening the bolts and taking off the derby cover. Next, drain the primary fluid and remove the clutch actuator rod. Then, take out the clutch spring and pressure plate to access the clutch discs. Replace the worn discs and reassemble the components in reverse order, ensuring proper torque specifications and fluid levels.
camshaft cover
simply put, buy a repair manual; you are going to need it. Be prepared to remove the primary cover.
The primary oil goes in the clutch cover (derby) opening, or if you wish you can remove the oval-shaped chain inspection cover and pour it in there. Use one quart.
If the bike is on the jiffy stand you sure will. Best to have the bike on a lift or jack to "level" things out.