0
What else can I help you with?
What is the difference between XS750 and XV750 Virago?
The XS750 is an inline 3 cylinder bike, that is the cylinders are all in a line, brought out in two guises, a custom the XS750se and the standard XS750 The XV750 is a 2 cylinder V engine, their are 2 cylinders, one behind the other in a v configuration, used to minimise width of the bike
How do you put an XV920 into an XV750 frame?
you dont
What the model of Yamaha motor scooter with Vin?
xv750
What is the fork oil capacity of a 90 xv750 virago?
1988-1997 model XV750, each fork tube/stanchion holds 13.4 US fluid ounces (13.9 Imp. fl. oz.; 396 ml) and will need to be 6.1 inches (15.5 cm) below top of tube when forks are collapsed completely and springs removed. 1981-1983 Virago XV750 holds only 9.4 US fluid ounces (9.78 Imp. fl. oz.; 278 ml). Spring lengths should be 20.2 inches (51.3 cm) for '88-'97 model XV750, and are 25 inches (63.5 cm) for '81-'83.
Are there any other motorcycle engines that will fit in my 1981 Yamaha xv750?
Any virago 750-920 between the years 81-83 and any newer virago will work as well as long as you change the everything you need to make it run
How do you remove a seat for a Yamaha XV750?
take bolts out at front left and right side then slide entire seat forward and lift off
Where are the vacuum lines on a 1982 Yamaha XV750 Virago supposed to go?
On a 1982 Yamaha XV750 Virago, the vacuum lines connect to the carburetors and the petcock. Typically, one line runs from each carburetor's vacuum port to the petcock to enable fuel flow when the engine is running. Ensure that the lines are not kinked or damaged, as this can affect performance. Always consult the service manual for specific routing and diagrams for your model.
How do you remove seat on 1981 Yamaha xv750?
To remove the seat on a 1981 Yamaha XV750, first, locate the seat lock mechanism, typically found near the back of the seat. Use a key or a flathead screwdriver to unlock it, then lift the rear of the seat upwards. Gently slide the seat towards the rear of the bike to disengage it from the mounting points at the front. Be cautious with any wiring or components that may be attached to the seat.
What is the engine oil capacity for a 81 Yamaha virago xv750?
It actually holds 3.8 quarts. If you are changing the oil: with filter change: 3.3 quarts without: 3.2 quarts
How do you rebuild a carburetor for a 93 Yamaha virago 750?
good question, how can you find instructions on this, i have same problem with a 91 xv750 and a 95 virago xv1100 . i dont know if the whole rebuild is done in the bowl by the float. or if you have to take apart the to also good question, how can you find instructions on this, i have same problem with a 91 xv750 and a 95 virago xv1100 . i dont know if the whole rebuild is done in the bowl by the float. or if you have to take apart the to also
Does the Yamaha xv750 have the same seat as the xv700?
It appears to have the same part number. I compared a 1990 xv750 with a 1986 xv700 and they both have Yamaha part number 3CF-24730-10-00. I have an '86 xv700 so I'm always shopping for interchangeability. I use bikebandit.com or servicehonda.com for their OEM part finders. I can select my Virago and get the part number then start comparing to other models and years of the Virago. Helps a lot with searching online and on ebay for parts.
What kind of oil is needed in a 1995 Virago XV750?
20W40 or 10 W40 motor oil will do. Some use Yamalube, I just use Wal-mart stuff. The engine is almost indestructible.
