answersLogoWhite

0

The gas oil ratio for a 1987 Polaris Trail Boss 250 R ES is typically 40:1, meaning you should mix 40 parts gasoline to 1 part two-stroke oil. It's essential to use high-quality two-stroke oil to ensure optimal engine performance and longevity. Always refer to the owner's manual for specific recommendations for your model.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How fast is a polaris trail boss 250?

My 98 polaris trail boss does about 55-60mph


Is the 1993 Polaris Trail Boss 350 air cooled?

No, it isn't. The Polaris Trail Boss 350 is a liquid cooled 2-stroke.


What is the compression for a 1993 Polaris 250 Trail Boss?

I have a 1993 Polaris 250 Trail Boss. It won't start. It floods out the carb. Could it be low compression?


What is the year for a polaris trail boss 250 4x4 with vin?

1990 vin location for a trail boss 4wd


How fast is a polaris 330 trail boss?

I can get to 70-80 MPH


How do you adjust the chain on a polaris trail boss 325?

take out links


How much transmission fluid does a 1987 polaris trail boss take?

4 to 6 qourts and some take 8 to 9 if u have 4 wd


Do you mix oil into the gas of a Polaris Trail Boss 350 4-stroke?

No, you don't mix oil into the gas of a Polaris Trail Boss 350 4-stroke. It is a 4-stroke engine, and you do notmix oil with the gas.


Location of fuel filter on polaris 330 trail boss?

The location of the fuel filter on a Polaris 330 Trail Boss is in the fuel line that connects to the fuel pump. The fuel pump is located on the driver's side of the motor.


Where will you find the VIN number for a 1987 polaris 250 trail boss?

it should be on the front of the frame this means take the front plactic and it should be on one of the down tubes


Where do you check the crankcase oil in a 1987 250 Polaris Trail boss?

There is no oil to be checked, it's a 2 cycle so the system gets it's lube that way.


How do you remove chain on 2000 polaris trail boss 325?

The chain on a 2000 Polaris Trail Boss 325 is removed by loosening the retaining bolts and applying tension away from the sprockets. The chain can them be slipped off the sprockets and removed.