4.4L with filter
According to my 2005 Suzuki C50's Owner's Manual, you need to use a 10W40 oil with an API rating of SF or SG. For an oil AND filter change, you need 3.6qts (3400mL). For just an oil change, you'll need 3.2qts (3000mL).
With filter 2.1 Qts
On the lower right side of ther motor there is a small oil window. Written below it is 3000 ml which means 3 litres. I belive that this is the oil capacity, but it is always best to call a dealer and ask. Steve D
standing up straight the oil should be between the marks.! you are welcome
I ride a Suzuki M50 BLVD and their is no oil reset button. I do not know about the Suzuki C50 BLVD.
My Clymer maintenance book said to use SAE10-W40 weight oil or a lighter viscosity oil (10W30) in cool climates and a heavier viscosity oil (20W50)in warm or hot climates.
There is no oil contained in the driveshaft housing of a C50. It is essentially "dry". However, there is fluid in the final drive that should be level with the bottom of the fill plug when the bike is upright. Do be aware that while there is no oil in the driveshaft, the splined ends of the internal driveshaft must be greased periodically which requires the removal of the final drive.
For a 2005 Suzuki C50, it is recommended to use 10W-40 oil that meets the JASO MA or MA2 specifications, which is suitable for motorcycles with wet clutches. Synthetic or conventional oil can be used, but many riders prefer synthetic for better performance and protection. Always check the owner's manual for specific oil recommendations and capacities.
four and one half quarts
1.8 qt no filter-------2.1 with filter
What is the oil capacity for a 2005 Honda crf50