0
What else can I help you with?
Can the vehicle be started while applying clutch?
Yes. Its actually quite good for the starter motor.
What is the purpose of an engineer?
Hey Get this.. The purpose of an engine.. Is to propell and move the vehicle the motor is in lol
How do you change the clutch on an Audi A4?
To remove the clutch the vehicle would need suspending to access better. After it as been lifted the motor mount and clutch can be removed. Replace and return parts.
Why do motors have clutch?
W/o a clutch you'd have to turn the engine off every time you wanted to stop the vehicle. You'd also need a starter motor strong enough not only to crank the motor over, but also to move the whole vehicle forward until the engine had fired back up.
What is a function of the clutch in the vehicle?
The purpose of a clutch on a vehicle is to disconnect the drive of the engine from the gearbox (this would be required when the vehicle is stationary or to change gear). While the engine is running the crankshaft is continually turning, It is the crankshaft that turns the gearbox and via the gearbox the road wheels. Obviously there are times when the engine is running but drive is not required, The clutch is the mechanism by which this is achieved.
How do you replace a clutch cable on a 1989 Mitsubishi Triton from foot peddle to motor?
To replace the clutch cable on a 1989 Mitsubishi Triton from the foot pedal to the motor you need to secure the vehicle with blocks behind all of the tires. Next, you will need to life up the frame to give you enough room to get under the vehicle safely. Remove the clutch cable from the motor first and follow it up to the foot pedal. Remove the cable from the foot pedal area and then attach the new cable.
What purpose does a centrifugal clutch serve?
In small engine cars, the centrifugal clutch serves as an automatic clutch that allows the vehicle's engine to idle without the driver doing anything. Such clutches are commonly used in chainsaws, go-karts, and lawnmowers.
Why does the Front of the car judder at around 60 mph but goes when clutch is depressed?
tension on the motor causes a slight vibration in the on the frame of the vehicle
How do you check protection valve on tractor tralior?
With the vehicle aired up, push in the clutch, put the vehicle into gear, and turn off the ignition (leaving the tractor protection valve pushed in). When the motor is shut off, release the clutch. The motor will be off and the vehicle will be in gear, which will prevent you from rolling. Now, you simply pump on the brake pedal. This will reduce air pressure in the tanks (which won't build back up, as the motor is cut off). The tractor protection valve should pop out automatically when air pressure gets below 60.
What is the purpose of the national highway traffic safety administration?
The National Highway Traffic Safety Administration's main purpose is to reduce vehicle related crashes. They accomplish this by enforcing Federal Motor Vehicle Safety Standards.
What is the caseing between the motor and the transmission in a 4x4 jeep?
Bell housing. Contains the clutch & flywheel on a manual transmission vehicle. On an automatic it contains the torque converter.
What is the main purpose of the National Highway Traffic Safety administration?
The National Highway Traffic Safety Administration's main purpose is to reduce vehicle related crashes. They accomplish this by enforcing Federal Motor Vehicle Safety Standards.
