0,80 to 0,90mm (from Haynes manual)
Look for it in the cylinder head, at the top of the engine. You can find it easily by following the spark plug lead or wire.
The spark plug gap for a Polaris Indy 500 should be set between .025 and .028 inches. A new spark plug should need no adjustments as they come preset from the factory.
it sounds kinda like a stator problem or spark plug or cdi box
For a 2005 Polaris Sportsman 500 6x6, the recommended spark plug is the NGK BR9ES. This spark plug is designed to provide optimal performance and reliability for your ATV. Always ensure the spark plug gap is set correctly according to the manufacturer's specifications before installation.
Ngk br8es.
A 1968 Ford Galaxie 500 with a 390 engine should use a spark plug such as an E3 brand spark plug. This plug should have a tapered seat with 18mm threads.
0.070
Is asking
To change a spark plug you need to take off the seat and the side panel on the right side. After you do this the spark plug will be in front of the carb and on top of the engine block.
On a 1998 Polaris 500 4x4, the spark plug is located on the side of the engine, beneath the hood. To access it, you may need to remove the plastic cover or panels that obstruct the area. The spark plug is typically positioned near the front of the engine, making it relatively easy to reach for replacement or maintenance. Always ensure to disconnect the spark plug wire before attempting to remove or replace the spark plug.
0.6mm - 0.7mm
.035 inch