If it's a 1981-83 with BP7ES NGK spark Plug use a 0.032 inch gap.
82.00 HP (59.9 kW)) @ 9000 RPM
The Filter is inside the round cap at the lower front of the motor. The drain plug is right below that. I usually remove the filter first and the remove the drain plug
1 down,nuetral, 2,3,4,5 up
Sure anything is possible with a little ingenuity - Yamaha parts especially older models can be swaped without too much fuss.
Follow the cable down to a reservoir adjacent to the steering head.
What is the spark plug gap for a 1996 suzuki gsxr 750?
The 1979 Suzuki 750 spark plug gap is .018. Most spark plugs will come pre-gapped from the spark plug manufacturer.
ou probably have a bad side stand safety switchY
The spark plug gap for a Yamaha Maxim 750 is typically set at 0.8 to 0.9 mm (0.031 to 0.035 inches). It's important to check the specific service manual for your model year, as the gap can vary slightly depending on the engine configuration. Proper gap settings ensure optimal performance and efficiency of the engine. Always adjust the gap carefully using a spark plug gap tool for best results.
it's behind the right suspension bar. it's a black allen tip.
It is 0.028 in.
Yes, you can potentially fit an 83 Yamaha Maxim 750 gas tank on an 83 Yamaha 750 Seca, as both bikes share similar engine components and chassis designs. However, there may be slight differences in mounting points or fuel line connections that could require some modification. It's important to check for compatibility regarding the tank's shape and capacity to ensure it fits properly. Always consult a motorcycle mechanic or experienced enthusiast for specific advice on modifications.