Ngk bmr2a
The oil drain plug, on a Kawasaki Mule Model 2510, is on the bottom of the oil pan. The oil pan is on the lawless part of the engine.
Napa Gold FIL 1394 Napa Powersports PFI PS1394
The oil capacity for a Kawasaki Mule 2510 is approximately 2.0 quarts (1.9 liters) with an oil filter change. If you are only changing the oil without replacing the filter, the capacity is about 1.8 quarts (1.7 liters). Always refer to the owner's manual for the most accurate specifications and recommendations.
NGK spark plug part number BPR5ES
To change the starter on a Kawasaki Mule 2510, first disconnect the battery to ensure safety. Remove the starter cover and locate the starter motor, then disconnect the wiring harness and the mounting bolts securing the starter in place. Take out the old starter and replace it with the new one, reattaching the bolts and wiring harness. Finally, replace the starter cover and reconnect the battery.
To replace the 4x4 shifter cable on a 1995 Kawasaki Mule 2510, first, disconnect the battery for safety. Remove the old cable by detaching it from both the shifter lever and the transfer case. Install the new cable by securing it to the shifter lever and connecting it to the transfer case, ensuring it is properly adjusted. Finally, reconnect the battery and test the shifter to ensure it operates smoothly.
The Kawasaki Mule 2510 typically has an oil capacity of about 2.5 quarts (or approximately 2.4 liters) when including the oil filter. It's important to consult the owner's manual for specific maintenance guidelines and to ensure the correct oil type is used for optimal performance. Regular oil changes are essential for keeping the engine running smoothly.
There is a hole in the front diff guard, thats where you add it (remove the nut). On the left side of the diff there is another nut remove it to drain before adding.
According to our sources it is .028-.031 or 0.8 millimeters which is in between
how much for Kawasaki mule 3010 with 170 hrs
The spark plug on a Kawasaki Mule 610 is located on the engine, typically on the side of the engine block. To access it, you may need to remove any surrounding components or covers. It's usually best to consult the owner's manual for specific details and diagrams related to your model.
To disconnect the front drive shaft from a 2002 Kawasaki Mule 2510, first, ensure the vehicle is on a flat surface and secure it with wheel chocks. Remove any necessary panels to access the drive shaft. Next, locate the two bolts securing the front drive shaft to the front differential and the other end to the transfer case, using the appropriate tools to remove them. Carefully slide the drive shaft out of the yoke to complete the disconnection.