The oil drain plug, on a Kawasaki Mule Model 2510, is on the bottom of the oil pan. The oil pan is on the lawless part of the engine.
The oil dipstick, on your Kawasaki Mule 610, can be found on the right side of the engine. The top to the oil dipstick should be colored black.
i dont know i need to find out
It is 7530.
yes
20 hp
The Kawasaki Mule 2510 typically has an oil capacity of about 2.5 quarts (or approximately 2.4 liters) when including the oil filter. It's important to consult the owner's manual for specific maintenance guidelines and to ensure the correct oil type is used for optimal performance. Regular oil changes are essential for keeping the engine running smoothly.
The oil capacity for a Kawasaki Mule 2510 is approximately 2.0 quarts (1.9 liters) with an oil filter change. If you are only changing the oil without replacing the filter, the capacity is about 1.8 quarts (1.7 liters). Always refer to the owner's manual for the most accurate specifications and recommendations.
Napa Gold FIL 1394 Napa Powersports PFI PS1394
Ngk bmr2a
add oil till full
The recommended type of oil to use for a Kawasaki 610 Mule is API SF. Th610 Mule will hold approximately 1.5 quarts of oil.
2510 = 251,000%
I have a 1997 mule 2510 You have to remove the whole rear end of it to replace the rear bearings because the bearings are inside the housing on the cv joint. The axle bolts in the rear diff with six bolts. you take the shocks and springs and all loose and drop the whole rear end and the and take the top part of the axle off the bottom half axle and then you will see the bearings
Motor Oil
% rate:= 2510 x 100%= 252100%
oil plug location
I have a 2007 Mule 4x4 610 and the oil capacity is 1.5 U.S. quarts. (1.4 L.)