Its is 20 foot pounds took me all day on my bike to find out what it was
To install the cylinder head on a 2006 Suzuki Forenza, first ensure the engine block is clean and free of debris. Place a new head gasket onto the block, aligning it with the dowel pins. Carefully position the cylinder head onto the gasket, ensuring all alignment dowels are correctly seated. Finally, torque the head bolts to the manufacturer's specifications in the recommended sequence to ensure proper sealing.
If you are getting exhaust smoke coming out of the radiator overflow, you need to replace the head gasket that seals the cylinder from the cylinder cap where your coolant runs through to cool the engine.
A common cause of problems in cylinder head gaskets is leaks in the gasket. When a leak forms, the gasket must be replaced.
Either your head gasket or base gasket are blown
gasket, head
remove head and replace gasket :)
Gasket between engine block and cylinder head
Begin by removing the cylinder head from your Chevrolet S 10 four-cylinder engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder head to its original position.
should you drain oil in the car if the head gasket is blow
A head gasket joins that cylinder head with the cylinder block. It separated the oil and the coolant passages. If the two mix, the head gasket will "blow" soon.
Yes , engine coolant can get in an engine cylinder from a bad head gasket , a warped or cracked cylinder head , a bad intake manifold gasket etc. ( P.S. I'm not a mechanic / technician )
You possibly have a leak in the cylinder head gasket.You possibly have a leak in the head gasket.