0
What else can I help you with?
What are the torque settings for the rear sprocket on a k5 gsxr 750?
The torque settings for the rear sprocket on a 2005 Suzuki GSX-R750 (K5) are typically around 40 Nm (29.5 lb-ft). It's important to use a torque wrench to ensure proper tightening and to follow the manufacturer's specifications for your specific model. Always check the service manual for the most accurate and detailed information.
Does a bigger sprocket give higher top speed?
A bigger front sprocket gives a higher top speed. A bigger rear sprocket gives a lower top speed. A bigger front sprocket is less torque more top speed, and a bigger rear sprocket is more torque less top speed.
What is the torque specifications 2005 Honda shadow vlx 600cc rear sprocket?
39hp and 36ftlbs of torque.
Torque settings for rear sprocket bandit 600?
For the Suzuki Bandit 600, the recommended torque setting for the rear sprocket nuts is typically around 40-50 Nm (29-37 lb-ft). It's important to consult the specific service manual for your model year to confirm the exact specifications, as they can vary. Always ensure that the sprocket is properly aligned and that the nuts are tightened in a crisscross pattern for even distribution of pressure. Regularly check these settings during maintenance to ensure safety and performance.
How do you take a 250 kawasaki Mojave sprocket off?
first. take the left side rear wheel off. then remove the 4 bolts that hold the sprocket to the sprocket holder. then remove sprocket
What is the torque specs for the brake caliper mounting bolts on a 1999 subaru legacy?
Front caliper mounting bracket bolts torque to 57ft-lbs Front caliper pin bolts torque to 27ft.lbs Rear Caliper mounting bracket bolts torque to 38ft-lbs Rear caliper pins torque to 15ft-lbs
How do you remove the rear sprocket on a polaris 90?
To remove the rear sprocket on a Polaris 90, first, ensure the ATV is secure and on a flat surface. Remove the rear wheel by loosening the lug nuts and taking off the wheel. Then, locate the sprocket bolts, typically found on the rear of the sprocket, and use the appropriate socket or wrench to unscrew and remove them. Finally, detach the sprocket from the hub, and replace or service as needed.
What are the rear hub nut torque settings on a Renault clio?
The rear hub nut torque settings on a Renault Clio should be set at 175Nm this is what holds the disc in place.
What are the torque settings for ring gear and carrier bearings on a Discovery 1 rear axle?
Crown wheel bolts 58Nm, use `Loctite Studlock` Bearing caps 90Nm.
What are the Torque settings for ford ka rear hubs?
235 NM
What are the peugeot 206 rear hub nut torque settings?
200Nm
Can anybody give me the rear sprocket torque setting for an sv650 2008 please?
Rear: 60Nm Front: 145Nm Please see the related link below for more information.
