0
The valve clearance for a 1987 Yamaha YFM350ERT Moto 4 is typically set at 0.10 mm (0.004 inches) for both the intake and exhaust valves. It's essential to check and adjust the clearance when the engine is cold to ensure proper valve operation and engine performance. Always refer to the service manual for specific details and procedures.
What else can I help you with?
What is the valve clearance for a 87 Yamaha moto 4 350 quad?
The valve clearance for a 1987 Yamaha Moto 4 350 quad is typically set at 0.10 mm (0.004 inches) for both the intake and exhaust valves. It's essential to check the owner's manual or service manual for specific specifications and adjustments, as tolerances may vary slightly based on the model or engine condition. Regular maintenance and checking of valve clearances can help ensure optimal engine performance.
What is the spark plug gap and valve setting for a 1987 Yamaha 350 big bear ATV?
What is the spark plug gap setting for a 1987 yamaha big bear
Is there valve clearance on a 1987 Nissan Maxima?
The 1987 Nissan Maxima VG30E engine uses hydraulic valve adjusters (also known as "cam followers") which cannot be adjusted. Therefore, there is no specific valve clearance. If you hear valve noise, it could indicate that there's either excessive wear of valve train parts or clogged hydraulic adjusters.
What is the Valve clearance settings and adjustment for a 1987 Honda 350 TRX ATV?
.003 on intake and exhaust
How is the valve clearance for 1987 Trx 250 x?
The valve clearance for a 1987 Honda TRX 250X is typically set at 0.05 mm (0.002 inches) for the intake valves and 0.08 mm (0.003 inches) for the exhaust valves. It's important to check and adjust the valve clearance regularly to ensure optimal engine performance. Make sure the engine is cold before making adjustments, and refer to the service manual for specific procedures and specifications.
How do you remove valve spring seats and valve oil seals for 1987 Yamaha Radian yz 600?
Answer to my own ?. Once the valve springs have been removed. pull out the valve seals with pliers. These will need to be replaced with new ones. The bottom valve spring seat will now slide out off the valve guide.
What is the weight of a 1987 Yamaha 15 hp outboard?
The dry weight of a 1987 model, 15 hp Yamaha outboard is 85 lbs.
What year was the Yamaha warrior first made?
The first year the Yamaha Warrior was made was 1987.
How fast does a 1987 Yamaha tw200 go?
about 70mph
Where is the orifice tube located on 1987 Dodge Dakota?
A 1987 Dakota uses an expansion valve, not an orifice tube.A 1987 Dakota uses an expansion valve, not an orifice tube.
Where is the PCV valve located in a 1987 Nissan Sentra?
You can find the PCV valve for your 1987 Nissan on top of the engine. The PCV valve will be near the air filter housing.
What are the valve adjustment specs for a 1987 Honda prelude 2.0?
The valve adjustment specifications for a 1987 Honda Prelude 2.0 (with the 2.0L engine) are typically set at 0.006 inches (0.15 mm) for both the intake and exhaust valves when the engine is cold. It's essential to ensure proper clearance to maintain engine performance and prevent valve train noise. Always refer to the vehicle's service manual for the most accurate and specific details related to your engine.
