0
The valve to rocker arm clearance is 0.04 millimeters on both of the exhaust and intake valves (4 total valves). Make sure that the engine is on the compression stroke and that the 'T' mark is lined up to the line in the viewing window in the left side of the engine. You will know that it is the compression stroke if there is some wobble/play in the rocker arms.
What else can I help you with?
Location of egr valve Honda accord ex 1991?
The EGR valve for a Honda EX 1991 is at the top of the engine. It is at the front, just to the left of center.
Do a 1991 Honda Accord have lifters on it?
valve lifters? it sho do
How can you make the 1991 16 valve Honda motor faster with no money?
Intakes, Pipes,
What are the Torque settings for a 3 cylinder 1991 Suzuki alto car in lbft and valve clearance please?
29,40,51 lbft
1991 Honda accord idling up and down consistently don't know what the problem is?
Could be your Idle air control valve.
Is there a fuel pump shutoff valve on a 1999 Honda civic lx?
all cars built after 1991 are required to have a emergancy fuel shutoff.
Does the 1991 Honda Accord have an Airbag?
do 1991 honda accords have airbags?
How do you remove tail light lens on 1991 Honda?
1991 Honda what?...... Honda makes a lot of stuff.......
How to do valve clearance check and adjustment on 1991 Honda accord?
The valves are adjusted by loosening a 10 mm jam nut and checking the clearance with a feeler gauge. A certain procedure must be followed. Just Google "denlors valve adjustment article" for detailed "how to" instructions for most 4cyl Honda engines.
What is the weight of a 1991 Honda Accord?
Curb weight 2,822 lb of a 1991 Honda accord
How do you install an idle air control valve on a 1991 Honda accord lx?
Two bolts hold it on. Unhook the electric connector and two rubber hoses, that's it!
Where is the EGR valve on a 1991 Geo Metro?
The 1991 Geo Metro EGR valve can be located on the air cleaner housing. The valve will be on the back of the housing.
