yamalube 20w30
Yamalube. You need an oil without friction modifiers in it, to ensure safe operation of the wet clutches.
On the side of the pullstart, there should be two black plastic covers. If you take the top one off you will be able to see the oil plug.
Remove the plug in the bottom of the oil pan. Allows the oil to drain out of the oil pan. Put the oil pan plug back to its original position. Fill the engine with new oil.
It is a safety feature. You must pull in the left brake lever fully to engage reverse, if you try to put it into reverse without doing so, the engine will kill.
650 cm3 which is equal to 650cc so if u have a oil cup for ur bike just put in 500cc then add another 150cc
yz 125 are considered a classic not an antique because of the technology put into it
For a Yamaha TT-R 125, it's recommended to use 10W-40 or 10W-30 motorcycle oil that meets the JASO MA or MA2 specifications. This type of oil ensures proper lubrication for both the engine and the clutch, which is essential for performance and longevity. Always check the owner's manual for specific recommendations and guidelines regarding oil changes and maintenance intervals.
2 places
On a grizzly 600 year 2000, When the oil get hot the oil light comes on, the fan don't work and when i put it in neural it starts the starter. It's a automatic, when you turn it off with the key you have to put it in neural, you turn it on the green light comes on it is in neural, It shouldn't start the starter normally but it does?????????????? Please Help
first u put a jack under the back of your grizzly 660 the oil tank is on the bottom and find the drain plug but before u unscrew the plug put it back down if you do not put it back down you will not get all the oil out and then unscrewand and empty
650ml
Wee wee