You will make lots of smoke and likely foul the spark plug and you will need to replace it. The engine is not designed to burn this mixture like a 2 stroke is.
It depends if it is a 2 stroke or a 4 stroke. A 2 stroke engine, you mix the gas and oil. A 4 stroke engine, there are separate tanks for the oil and gas.
The recommended oil to use for mixing with gas in a two-stroke engine is two-stroke engine oil.
All natural gas engines are 4 stroke. In a 2 stroke engine the oil is mixed with the gasoline. This is not possible when using natural gas as a fuel.
With a 2 stroke engine, you mix the oil with the gas. With a 4 stroke engine, there are separate tanks for the oil, and the gas.
A gas only engine has a spout where oil is added to the engine. If there is no spout, then it is a gas/oil engine. FYI - gas only engine is a four-stroke (four-cycle) engine and the gas/oil engine is two-stroke (two-cycle).
There is no oil to change in a two stroke engine. The lubricant is the oil that is mixed with the gas.
Usually no.
Two stroke gas is just regular gas with oil added. The oil is usually green in color and therefore tints the gas green. The ratio of oil to gas is specified by the engine manufacturer.
Three ounces of Two-Stroke oil per gallon of gas
No, you don't mix oil into the gas of a Polaris Trail Boss 350 4-stroke. It is a 4-stroke engine, and you do notmix oil with the gas.
pre mixed ration of oil : gas
On the third stroke. 1-Intake stroke. 2-Compression stroke. 3-Power stroke (spark) 4-Exhaust stroke.