As long as its Not a yz model blaster.
To remove the rear axle on a 1996 Yamaha Warrior, first, ensure the vehicle is on a stable surface and the rear is elevated. Remove the rear wheels and any brake components that may obstruct access. Next, detach the axle nuts and use a hammer or a suitable tool to gently tap the axle out of the housing. Finally, ensure you check for any retaining clips or bolts that may need to be removed before fully extracting the axle.
22x10x9
how to remove rear axle from 1988 f250 ford
unscrew it. take it off.
no it wont the only other one that will fit is off the banshee
remove rims remove hubs then the 2 jam nuts pull of sproket before that loosen chain the pull axle strait out pretty simple
There are many different ways you can tell if the rear axle has gone out on a Yamaha 350 ATV. If there is a grinding sound or a slipping when trying to put the vehicle in gear, those may be an indication of this issue.
The axle to axle length for a 2000 Yamaha Banshee is approximately 48.5 inches (123 cm). This measurement refers to the distance between the centers of the front and rear axles, contributing to the overall stability and handling of the ATV.
Take rear cover off and losen the 6mm. head bolt. Rotate the gears and remove c-clip from axle. Slide axle out.
there is a gearbox in the middle of the rear axle with a drain nut on the bottom and a fill nut on the top
what other axle will fit a 94 kodiak 400 rear