Best To Throw It Out And Mix It Correct. Remember This Is The Only Lubrication The Engine Is Getting.
NO
50:1 gas to 2 cycle oil.
A four cycle engine does not use a gas/oil mixture. The oil is in the crankcase and the gas goes in the gas tank. If you put oil in the gas on a 4 cycle engine it will run poorly and smoke a lot.
The mixture is a 40:1 ratio, that's 3.2 oz of two cycle oil to 1 gallon of gas
No - 2 cycle oil is the only oil you should use in a 2 cycle motor. Because 2 cycle oil is designed to mix with the gas and lube the motor. Your "truck oil" is not the 4 cycle oil will not mix it is designed to just lube in the crank case.
Typically most poulan string trimmers are 2 cycle products. Most consumer products are mixed at 40 to 1 mixture, 3.2 oz of 2 cycle oil to 1 gallon of gas. higher end commercial product is a 50 to 1 mixture, 2.6 oz of 2 cycle oil to 1 gallon of gas.
Fuel:oil mixture for Homelite Blower UT08068R 32:1 4oz 2-cycle oil to 1 gallon gas
If it's a 1996 to a 1998 yamaha rt 100 you just pour straight gasoline in to the gas tank and their should be a seperate oiltank under the seat, put 2 cycle oil in that tank and it will mix it in on its own.
i have ran 6ounces of 2 cycle oil to 1 gallon of gas
2 cycle engine are mixed 40 to 1 ratio. One Gal. of gas to 3.2 oz of oil.
You won't go far wrong using a 40/1 mixture and adjusting if you need to.
2 cycle engine are mixed 40 to 1 ratio. One Gal. of gas to 3.2 oz of oil.