call sears give them your model number they will look it up for you
It is a Craftsman belt #144959 which appears to be 1/2" X 95 1/2"
Gates
To change the mower belt on a Kubota Model RCK44LT, first, disconnect the mower from the tractor and ensure the ignition is off. Remove the mower deck by unhooking the lift arms and the drive belt. Then, take off the old belt by releasing the tension and sliding it off the pulleys. Install the new belt by threading it through the pulleys in the correct sequence, reattach the mower deck, and reconnect the lift arms. Finally, check the belt tension before operating the mower.
make a drawing of how the old one is on it before replacing it,
Impossible to answer without knowing year, make & model, of mower.
You will need to order a manual on the mower from the manufacturer (I assume Simplicity).
How do you change a mower deck belt on a John Deere L130?Read more: How_do_you_change_a_mower_deck_belt_on_a_John_Deere_L130
you were no help
The drive belt is a Craftsman #140294 The deck belts are Craftman #'s 180808 & 174368
john deere LT155 38inch cut mower deck
I changed the blade belt on my Murray mower. Now one blade stops and goes. If I lower the deck the blade stop . What did I do wrong?
How do you replace a mower deck belt on a stx38 hydro
The deck must be slipped beneath the machine from the left, the lift lever locked down and the rear hangers and front hanger plate attached. The belt will take take a 90 degree twist with the front part to the left side.