The rear wheel spindle nut on a 2003 Suzuki SV1000 typically requires a 27mm socket. Ensure you use a deep socket for proper clearance and leverage when loosening or tightening the nut. Always refer to your owner's manual or service guide for the most accurate specifications.
24 mm i believe
First you loosen the axle nut using a 34mm deep socket. then remove wheel. take brake caliper off then the upper and lower ball joints. then the spindle should come off.
36mm rear , 27mm front
The spindle is what the front wheel is mounted on. It is the shaft that the wheel bearing slides up on.
The spinning wheel or spindle.
The spinning wheel or spindle.
The 2010 Suzuki SX4 has front wheel drive.
The 2013 Suzuki Kizashi has front wheel drive.
The 2011 Suzuki SX4 has front wheel drive.
The 2008 Suzuki SX4 has front wheel drive.
The 2010 Suzuki Kizashi has front wheel drive.
The 2012 Suzuki Kizashi has front wheel drive.